Home  -  News  -  Price List  -  Order Form  -  Dealers  -  Rides  -  Links  -  FAQ  -  Contact Us  -  Feedback

Programming Software  -  Scan Tool Software  -  Injector Flow Bench  -  Technical Data  -  Trouble Shooting Chart

Computer Location  -  Mileage Tips  -  Horsepower  -  Shipping Information  -  Search Site

  • EDGE  SimuTech  ECM/PCM Diagnostics

  • Performance Automotive Electronics

  • ECU Performance Programming

  • Performance Chip Programming

  • SUN 450 Diagnostic System

  • Automotive Performance Milling/Lathe/Welding

  • Automotive PCM and electronics repairs

  • ASNU Electronic Injector Flow Bench

  • ECU Reverse Engineering via RaceLogic Emulator

  • New Superflow SF600 Flow Bench--Electronic Valve Spring Analysis

  • Electronic Camshaft Verification Bench

 

  

Westers Garage GMT Tuner

This OBD2 Tuning program is a general purpose VCM calibration editor that allows you to make a wide variety of calibration changes to your vehicle OBD2 VCM/PCM/TCM  from an 'easy to use' Windows environment.

After reading your calibration from your vehicle control module, the program locates and displays the calibration parameters in standard engineering units so there's no need to work with or even understand hex and binary numbers. We've tried to make the tables simple to understand as they will often correspond to what your scan tool shows you.

Features:

  • Ability to read , modify and reprogram most 1996-2007 GM powertrain control modules (PCM).  This includes specific 3.1L, 3.4L, 3.8L, 4.0L, 4.3L, 4.6L, 4.8L, 5.0L, 5.3L, 5.7L, 6.0L, 6.5TD, 6.6L Duramax, 7.4L and 8.1L -- the most complete programming lineup available for popular GM trucks and cars !

  • You can rewrite the calibration section only (faster programming), or  do a complete system and calibration reflash.

  • The software automatically clears trouble codes prior to reading or writing the PCM to ensure proper communication . Trouble codes are then re-cleared after reflashing to ensure normal operation after reprogramming. This is normally a big problem on Corvette with other programming software packages.

  • NEW PCM Recovery Feature in the event of a failed reflash. Recover dead computers previously 'fried' by GM TIS software or other reprogramming software packages.

  • VIN check and software calibration level check.

  • Control of all torque management and abuse modes.

  • Ability to adjust engine rev and  speed limiting for all years (raising speed limiter requires speed rated tires).

  • Ability to adjust for any tire size or differential ratio change and fix ABS pulse count for scaling errors.

  • Modify the VE fuel tables for more performance.

  • Modify injection timing for Duramax and 6.5Turbo Diesel as well as ignition timing in all temperature modes for V6's and V8 gas models !

  • Ability to solve transmission shift problems and improve shift quality.

  • The only available software for 1996-2003+ 6.5 Turbo Diesel tuning !

  • Complete DTC list for check engine light disable -- all model year trouble codes (It may be against the law to modify these values).

  • Passkey disable and BCM and other module communication disable for Offroad installations.

  • Enables ability to rescale the fuel tank(s) for larger tank installations.

  • Copy and paste (any portion of) and PRINT tables within the editor .

  • Modify tune directly in the graphical environment and watch the numerical value text that shows where you are editing !

  • Full compare between two calibrations (same model only).

  • Ability to 'copyright' your changes and lock the PCM to prevent over-writing your proven tune. (Locking prevents everyone, even YOU from re-accessing the ECM).

  • We prefer you tune with a chassis dyno and proper test equipment, as this software is very powerful.

  • Best of all...NO LICENSE LIMIT ! We no longer offer FREE updates, other than commitments to our prior customers. Email us for update requests.

  • Roadrunner USB Drivers here...usb_drivers.zip these are needed for the realtime unit, which must be fitted in the ECM of your choice. 

  • The ONLY programming software for the Olds Shelby 1 with 4.0L V8 Northstar  !

DOWNLOADS

Version 2.09 Update You must have the Standard Version installed first, or have installed from your CD.

Now includes the following features:

  • Added "Calibration module import" function that allows you to import entire module section from one calibration into another.  Very helpful with transmission swaps.
  • Added the "Table Export/import function that allows you to export table values to a file and then import those values into another table or calibration.
  • Added a Reports menu with new reporting functions including a calibration difference summary report and a difference detail report for comparing calibrations.
  • The speed calibration function for the LT1 cars has been improved and now includes the speed error method and the automatic updating of the transmission tables.
  • Added checksum verification when you open a calibration file. A warning message is displayed if any incorrect checksums are found.
  • Added command line support so you can associate *.ddt file with the program and automatically start the OBDII Tuner by double clicking on a *.ddt file.
  • Added support for using a ',' as the decimal separator for European users.
  • The GMT OBDII Tuner program now supports 32-bit calibration values.

 

 GMT kits are available in Serial or USB format.

We've used our own software package since 1996 to develop our own performance programs.  For software updates, please contact us. Current Vehicle Support Listing.

See Programming Software Price List to view details on purchasing our system

Back to Top

 

 

Westers' Garage   218 Centre Street   Box 159   Tilley, Alberta -- Canada   T0J 3K0....We'll get YOU going FAST !!

1-403-377-CARS (2277) and 1-403-377-2270 (FAX) or EMAIL US

VISA - MasterCard - PayPal - Cash - Money Order - Personal Cheque (allow clearance time)

Thank you for visiting and remember to come back often as our product list is frequently updated!

 
   © Wester's Garage 2006